Loading... Please wait...
- Home
- MAINTENANCE
- Reef Octopus KS100 Nilson Kalk Reactor
Categories
Brands
Current Top Sellers
Why Fragtastic is the Best!
Most products on our website are in stock and shipped by us from our retail location.
Be sure to also go to Our Facebook Page and Like Us. We have giveaways, discounts, and specials on there all the time. There is no purchase necessary on our giveaways and prizes. Make sure also to sign up for our Email updates, to keep in the loop with new products and specials we are doing.
You can finally stop waiting on hold with those other online vendors. Fragtastic Reef is open 7 DAYS A WEEK - Because we care about your success and your tank!
Product Description
Octopus KS-100 Kalkwasser Reactor
Gently mixes your calcium hydroxide into kalk mix for top off in your aquarium to maintain your levels.
Reef Octopus Kalk Stirrer (Nilsen Reactor) carries a high torque low RPM motor that effectively, silently and gently mixes your calcium hydroxide (kalkwasser). This method is not only ideal but is also the safest way of dosing the freshest possible kalkwasser to your reef system. The Reef Octopus Kalk Stirrer is designed to keep the undissolved particles at the bottom of the reactor chamber while always leaving the clear highly saturated kalkwasser liquid at the top. Adding kalk powder couldn’t be easier with just a few twists of the large thumb screws releasing the seal-tight lid for quick and easy kalk refills.
No need for pesky Powerheads
No need for pesky powerheads that randomly need to be cleaned or replace and no more risky dosing with large vats of lime water which take up valuable space. You will never have to worry about premixing or clogs again when using our new innovative and efficient Kalk Stirrer (Nilsen Reactor) which are extremely easy to use and salt-water safe, making them simply the most economical and best kalk reactor out there.
*The Kalk Stirrer uses a motor that has a lifetime of about 1500 hours. Please don’t run unit continuously.
Rated for Aquariums up to 130 Gallons
Footprint: 5.5″ x 5.5″ | Body Diameter: 4"″ | Height: 27.6″
Requires control timer and feed pump
Contents
- Kalk Stirrer Body with Stirrer Pump
- Quick Connect Input and Output: 1/4″
Requirements
- Kalkwasser
- Water Feed Pump that will deliver water through the reactor
- Timer
- RO Tubing
Warranty - 1 year warranty on reactor body
Installation Instructions
-
Place the reactor in a location where the outlet is higher than the sump. The quick connect outlet is where the kalkwasser will drip from and typically hung over the sump in a high flow area away from any pumps. The output must flow downhill to the sump area.
-
Connect the feed pump from your top off container to the Kalkwasser reactor with 1/4 RO tubing. Peristaltic pumps are preferred due to the high level of accuracy and anti siphon characteristics. (If you are using a peristaltic pump then skip to step #4)
-
If you are using a feed pump like Tom’s Aqualifter then the input tubing should be placed in your reservoir with RO/DI water. Connect the outlet of the pump to a short piece of 1/4” tubing and install a tee fitting with one end securely mounted several feet above the water level of your top off reservoir and the other going to the reactor. The tee is placed in the line to create a siphon break. You may also use a small pump such as a maxijet modded with a fitting on the output to feed water to the reactor. You will have to use a check valve in the line to prevent any back siphoning into your reservoir.
-
The Kalkwasser reactor should be filled 2/3 of the way with RO/DI water.
- Add enough kalk powder to fill the reactor with approximately 3⁄4 – 1cup of kalkwasser. The idea is that the twin blades create a slow motion that gently disturbs the kalk in to solution. (Too much kalk will place stress on the motor and can cause pre-mature failure) Allow the solution to settle for 15 minutes prior to turning the reactor on. Now you are ready to plug the reactor’s transformer into a power source and begin to dose saturated Kalkwasser to your aquarium. The stirrer should be set on a controller to run ever 2 hours for approximately 10-15 minutes. Do not run these units 24/7.
Product Reviews
USA SHIPPING
Limited Time - FREE SHIPPING ON ALL ORDERS OVER $29! Most orders will ship the same or next business day of when you place the order. We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Almost all items on are website qualify for FLAT RATE or FREE shipping! Order over $29 in products and receive FREE shipping on your order.
International Shipping & Orders
We ship Worldwide everyday. Please contact us for shipping quotes and availability on any products you would like to purchase.International orders do NOT qualify for free shipping, please contact us for a shipping quote.
We only accept Paypal as payment for international orders and customers and must ship to a confirmed address.
Product Warranty
EVERY ITEM WE SELL IS BRAND NEW & COMES WITH A FULL MANUFACTURE WARRANTY! We do not sell used, defective, or returned product to our customers. Only exception to this is in our clearance and open box section of our website. Even those items still include a full warranty, and are usually an amazing deal if your looking to save money!
Most brands and products we sell have typically a 1 year warranty, with some products having up to 3 or more years. If you have any questions on warranties you can check the manufacture website or just contact us with any questions. At FragtasticReef.com we sell only the best products, and only products we recommend and use ourselves, so you can buy with confidence.
